Cylinder Block for 2018 Jeep Grand Cherokee

Sales Codes. [DBB]= All Manual Transmissions. [DG0]= All Automatic Transmissions. [DGQ] = 5-Speed Automatic 5-45RF. [EV0] = All 4.7L, 8 Cylinder Gas Engines. [EVA] = Next Generation 4.7L Magnum V8. [EVD] = Magnum 4.7L V8 FFV. HEATER Engine Block Notes: NOTES: Sales Codes. Eer = 2.7l v6 dohc 24v mpi. For 2.7L and 3.5L Engines. Screw and washer notes: note;. Edz = 2.4l 4 cylinder 16v smpi. E.

Mounting, Transmission To Cylinder Block. Transmission To Engine. Transmisasion To Cylinder Block.

M24x1.50. Item 13 Pin Kit Also Contained in Short Block Engine Kit. All Plugs And Dowel Pins Must Be Installed On Cylinder Block Before Installing Engine. Main Oil Gallery. Coolant Drain. Coolant Passage.

Item 13 Pin Kit Also Contained in Short Block Engine Kit. All Plugs And Dowel Pins Must Be Installed On Cylinder Block Before Installing Engine. Transaxle To Cylinder Block. Mounting, Cylinder Head To Cylinder Block. Transmission To Cylinder Block. Cylinder Heads To Cylinder Block. Mega Cab. Engine Block To Transmission Assembly. Engine Block To Cylinder Head. Engine Block To Clutch Housing.

M25. Oil Drain Passage.

[m14 x 1.5]. Cylinder Block Coolant Drain. Engine Block Water Jacket Drain. Cylinder Block Water Jacket Drain.

M8x1.25x40.00. Pump Bracket to Engine. Mounting, Main Bearing Crossbar To Cylinder Block.

M8x1.25x58.00. Mounting, Main Bearing Cross To Cylinder Block. Main Bearing Cross Bar To Cylinder Block.

Pin

Item 13 Pin Kit Also Contained in Short Block Engine Kit. All Plugs And Dowel Pins Must Be Installed On Cylinder Block Before Installing Engine. Timing Chain Guide. Timing Chain Drive. Panel Attaching Pins.

Included With Short Block Engine. MUST Be Installed On Cylinder Block Before Engine Is Installed. Item 13 Pin Kit Also Contained in Short Block Engine Kit All Plugs And Dowel Pins Must Be Installed On Cylinder Block Before Installing Engine. MUST Be Installed Onto Cylinder Block Before Engine Is Installed.

M5x.08x16.00. Piston Oil Cooler Jet To Cylinder Block. Door Handle to Door M5x16.

M11x1.50x94.00. Mounting, Inboard, Main Bearing Cap To Cylinder Block. Inner, Main Bearing Cap To Cylinder Block.

M8x1.25x97.00. Outer Main Bearing Cap To Cylinder Block. Main, Outboard, Main Bearing Cap To Cylinder Block.

Water Jacket Core. Two [2] Per Cylinder Head. Back Of Lower Intake Manifold. Mega Cab. 1.25 Diameter. [1 1/4] With Zinc Plate. 1.25 Diameter. 2 Per Cylinder Head.